36″H Two-bay Cabinet with Deep Door (4U+6U)

Name: 36"H Two-bay Cabinet with Deep Door (4U+6U)
SKU: RCCD-4636
Price: 827.06 USD
Availability: InStock

11"D x 25"W

$827.06 MSRP

Model RCCD-4636

A low profile wall cabinet secures 19" E.I.A. network equipment with minimal intrusion into the room. Maximizing space with two mounting bays, the RCCD includes a deep front door which contributes to overall depth of about 11". The 4U upper bay features pivoting rails for easy access to cables, while the 6U lower bay holds equipment vertically with dual-punch rails for multiple mounting options. Network Grey powder epoxy finish.

Add to Favorites

Compare

16-gauge steel construction with rear cutouts to fit over wall obstructions and aid cable management.
11-gauge rails in the 4U top section accommodate (horizontally-mounted) panel, such as a shallow patch panel. Rails, tapped 10-32, pivot down for access.
11-gauge rails in the 6U bottom section vertically-mount 19” equipment. Rails, tapped 10-32, can be adjusted (vertically) to accommodate equipment up to 30.2”D.
Deep door features beveled edges, vents, and sloped top with hinge for quick access to top section without opening main compartment. Key lock.
Knockouts in top, base, side
Multiple bridge lances
Vents in base accommodate (optional) single fan kits
Includes electrical box in base
Side key lock
Network Grey powder epoxy finish

UPPER BAY Rack Space (horizontal-mount): 4U x 4.97″D usable
LOWER BAY Rack Space (vertical-mount): 6U x 30.2″D usable
OVERALL Measurements: 25.5”W x 36”H x 11.187”D
Load Capacity: 150 lbs.

Spec Sheet: 1898-RCCD4636
CAD drawings: RCCD-4636

EIA/TIA compliant
Certified U.S. steel
Made in Missouri, U.S.A.

The wall-mount cabinet shall be Lowell Model RCCD-4636, which shall feature two mounting areas. Overall measurements shall be 25.5”W x 36”H (30.2”D usable) x 11.187”D. The 4U top section shall have 11-gauge rails that allow pivot-down access. The 6U bottom section shall have 11-gauge adjustable rails to vertically-mount 19” equipment. Rails shall be tapped 10-32 and also have square openings to allow the use of 12-24 or 6mm screws and cage nuts (not included). The deep front door shall have vents, beveled edges, and a sloped top that opens on a hinge to allow quick access to top section without opening main compartment. The cabinet shall feature knockouts and bridge lances for cable management. The cabinet shall be made in the U.S.A. with certified U.S. steel and have a Network Grey powder epoxy finish. It shall include an E.O. box in the base and a side lock.