Specialty products and problem solvers.

Accommodating non-rackmount gear:

1. Oversized equipment (too wide):
   • While many electronics ship ready to install using their own chassis brackets, some require special support to mount to a 19-inch rack. To mount wide equipment that doesn’t fit standard rail clearance, it may be secured to a VWS Series Shelf, which can be expanded to 22-inches and mounts at two points behind the rack’s front rails. Load capacity 50 lbs.
   • To mount wide equipment to a pull-out rack (LPOR, LPTR Series) or slim rack (LXR, LVR Series), zero-space shelves are designed to mount to four points on the rack’s side rails. Load capacity 250 lbs. Shelf models LPTR-NS, LXR-NS21, LXR-NS26.
2. Oversized equipment (too deep):
   • To mount deep equipment to a 19-in. rack, a VDS Series shelf may be the ticket. The VDS-1-1525 (1U) shelf expands to 25-in. deep and holds up to 400 lbs. The VDS-2-2032 (2U) shelf expands to 32-in. deep and holds up to 250 lbs.
3. Heavy equipment requiring more support:
   • Racks with adjustable rails will accept optional rear- or mid-rails for additional support. See individual rack specs to determine rail model needed (generally sold in pairs).
   • Some 44U racks will also accept Z-rails with chassis brackets to create a platform to support heavy equipment. Four Z-rails are needed to support a pair of chassis brackets. See ZR, ZRN, and CHB models.
4. Securing non-rackmount devices:
   • A number of rack shelves feature multiple mounting holes to secure a variety of devices. See USE, USV, USVC, USM Series.
5. More room for protruding knobs or controls:
   • Racks with adjustable rails, have side slots along the interior depth, which allow rails to be moved deeper into the rack to accommodate equipment extended equipment controls.
   • RRB Series brackets can also be mounted to a rack’s front rails, recessing equipment an additional 3-inches. Available in three sizes: 2U, 3U, 4U.
6. Adding a shelf to a two-post rack:
   • Two-post racks require special shelving that mounts to center posts, with the shelf proceeding from the center out the front and back. See the CMS Series.

Rack Security:

1. Doors with key lock:
   • While racks are often installed in secure areas, they may require another layer of security, especially when placed in open areas. Most racks ship with a rear door but a front door with key lock can be added to secure rack contents. See rack specs for more information.
   • Split doors can be used to provide separate security for rack contents, or partial security to leave some equipment freely accessible and other equipment under lock and key. The LDDF Series frame is added to the front of the rack, then one or two doors, with different locks, are mounted to the frame.
   • Front covers are available for in-wall boxes.
2. Equipment security covers:
   • To secure a single piece of mounted equipment, consider the SSC Series security cover. Available in vented steel or smoked plexiglass, the security cover mounts in the same holes as the equipment it protects, protruding outward to allow 1-1/2 inches for knobs or controls.
3. Locking utility drawer:
   • Secure loose equipment that stays with the installation by adding a locking drawer with or without a liner to protect drawer contents.

Space Savers & Easy Access:

1. Pull-out racks:
   • Pull-out (slide-out) racks make it easy to access equipment installed inside cabinetry. The base is secured to the millwork, while the mounting section slides in and out for easy access to equipment and connections. See the LPOR Series (pull-out) and LPTR Series (pull and turn) racks.
   • The LPSR studio rack is ideal for under-desk use, providing pull-out access to mounted equipment. With a 15-degree sloped front, users can easily keep an eye on equipment settings without getting up from a seated position.
2. Wall-mount racks:
   • A number of wall-mount racks provide swing-open cabinets for easy access. Racks can be field-mounted with the swing opening to the left or right. See the LWR Series and LWSR Series.
   • The LWBR Series is a wall-mount rack that includes a support base, so it’s actually a hybrid wall / floor unit with easy access. The LWBR also provides swing-open access to contents and cables.
   • Open frame wall-mount racks for networking include several styles that accommodate small to large installations. The SR and SGR Series have a front frame that swings open providing a fully open side for cable management. The HUB and PFR Series for smaller installations also feature hinges for easy access.
3. Racks that hold equipment vertically:
   • Some wall-mount racks are designed to hold equipment vertically, using minimal space. Some offer tilt-out access (LTR, LTCR, RCC, RCCD), while others are static units (SMR, VR Series). Either way these units take up minimal space for small installations.
4. Replace the door lock:
   • Most floor racks include a locking rear door, which may not be necessary when installed in a protected area. For quick access, you can replace the lock with a thumb latch for instant entry. _____ rack series.
5. Add a slide-out shelf:
   • The convertible shelf/drawer slides out for easy access.
   • The SLS shelf slides out and latches securely in the open position so you can work without accidental closure.

Built-in Economy:

1. Consider a wall shelf:
   • A wall-mount shelf, instead of a rack, may be the answer to hold one or two pieces of equipment. Shelves are available for light or heavy duty equipment. See the WS, WSL and FS Series.
2. Racks with fixed-position rails:
   • Ideal for installations that won’t require mounting rails to be moved deeper into the rack, racks with fixed rails can be more economical than those with adjustable rails. See the LFR Series.
3. Smaller footprint:
   • The LRS Series is a small two-post rack with angled front that takes a very small footprint. The simple rack can be used freestanding or bolted to a desk or counter. Ships unassembled.
   • Slim frame floor racks, LXR and LVR Series, are only 19-inches wide but accept 19 in. equipment.

Organizing Cables and Cords:

1. Dangling Cords:
   • Streamline wiring DC devices by converting multiple plugs to a multi-output power supply. Compact chassis available with 8 or 16 output terminals. DCP Series.
   • Remove excess loops by using the correct cord length needed. Equipment with removable cords can quickly change to a shorter cord with a straight or angled plug to save space. IEC Series.
2. Organizing Cables.
   • Clean installs not only look more professional, they make it easier to repair and/or update. Add vertical or horizontal cable managers and accessories to keep wiring in its place. See cable management rack accessories and hardware.

Dealing with Interference:

1. Rack isolation:
   • Isolation pads electrically isolate rack gear from conductive flooring (i.e. concrete) to prevent hums. ISO-P1
   • Isolation leg levelers with rubber base to electrically isolate rack from floor (set of 4). ISO-LL