Two-bay Rack w/Controlled Tilt-down Door (Recessed, 3U+3U)

Name: Two-bay Rack w/Controlled Tilt-down Door (Recessed, 3U+3U)
SKU: LTCR-3320R
Price: 1668.40 USD
Availability: InStock

6.8"D x 25"W

$1,668.40 MSRP

Model LTCR-3320R

Ideal for amplifiers, small mixers, PA systems or consumer electronics, the LTCR features oil-filled dampers that control the opening of the main compartment (lower bay), ensuring a slow lowering of the vertically-mounted equipment to the service position. The top compartment (upper bay) is designed to mount a horizontal panel, such as a control panel, and is hinged for swing-out access to wiring. This model is for recessed installation and includes a trim plate. Neutral Network Grey powder epoxy finish. Includes electrical box in the base.

Add to Favorites

Compare

3U top compartment (horizontal hold) is ideal for a 19 in. panel. Hinge on door allows swing-open access. Fixed rails pivot down for easier access to cables.
3U main compartment (vertical hold) for equipment up to 5.25 in. x 15.3 in. x 19 in. Opens with dampers to control rate of descent. Includes fixed rails and a removable shelf.
Both compartments secure with a single lock
Backbox with keyholes on 16 in. centers
Knockouts in top, bottom, rear
Vents at bottom and along integral formed handle
1 in. cable raceway on each side
E.O. box in base
Network Grey finish

Rack Space: 3U (top) + 3U (main)
Rack Height: 34.06 in. (36.00 w/trim plate)
Rack Width: 25.00 in. (26.50 w/trim plate)
Rack Depth: 6.09 in.
Load capacity 50 lbs.

Spec Sheet: 1903-LTCR3320R

EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.

The recessed wall rack with tilt-out operation shall be Lowell Model LTCR-3320R which shall measure 25.00”W x 34.06”H (26.50″W x 36.00″H with trim plate) and project 6.80 in. from wall. Construction shall be steel with front/bottom vents and a neutral Network Grey powder epoxy finish. The assembly shall include a backbox and two compartments to mount 19″ equipment. The backbox shall feature knockouts in top, bottom, and rear.
<&nbsp>
Oil-filled dampers shall control lowering of equipment when opened. A removable shelf shall be included. The main compartment shall mount equipment measuring up to 5.25″ (3U) x 15.3″ deep and store it in a vertical position. The top compartment shall mount equipment up to 5.25 in. (3U) x 4.3 in. deep. The assembly shall have a load capacity of 50 lbs. and include a single gang E.O. box in the base.

Hardware
Panel for up to 8 controls: D8P-ID-3
Panel for up to 9 controls: D9P-ID-3