44U Gangable Rack w/Accessory Bundle

Name: 44U Gangable Rack w/Accessory Bundle
SKU: LGNR-4427-BAV
Price: 4141.10 USD
Availability: InStock

27"D x 22"W

$4,141.10 MSRP

Model LGNR-4427-BAV

The LGNR is a fully welded, certified U.S. steel gangable rack with 16-gauge frame, seamless side frame construction, and 14-gauge top and base, reinforced at load-bearing junctions for strength equivalent to 11-gauge steel. Overall width is slightly narrow at 22 inches. This model includes a reversible rear door with key lock and an accessory bundle (see below).

Add to Favorites

Compare

Rack:

Configurable top has 10U opening for 19 in. panels. Solid closure panels included.
Recessed solid steel rear door with key lock
Two pairs of fully adjustable rails tapped 10-32 with printed RU scale
Cable Management: multiple lacing points, holes, knockout panels
Grounding stud
Threaded inserts (for leg levelers)
Beveled corners
Black wrinkle textured powder epoxy finish
Pilot Point screws with captive washers

Accessory Bundle:

Solid front door with key lock
Side panels
Power strip with 24 outlets (15A/20A), surge suppression, 12 ft. cord
Fan panel with 10 in. turbo fan (7U)
Thermostat for fan control
Slotted cable managers, 4 straight, 2 offset
Vertical cable manager
Heavy-duty leg levelers
Extra rack screws
Velcro cable wraps

Rack Space: 44U
Rack Height: 83.13 in.
Rack Width: 22.00 in.
Rack Depth: 27.00 in.
Useable Depth: 24.34 in.

Spec Sheet: 1650-LGNR4427BAV

EIA/TIA compliant
UL 2416 Listed
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.

The EIA/TIA compliant, UL Listed gangable equipment rack shall be Lowell Model LGNR-4427-BAV, which shall measure 22″W x 27″D x 83.13″H (44U). The rack shall be UL Listed in the U.S. and Canada with a load capacity of 3150 lbs. Construction shall be fully welded 16-gauge steel frame with 14-gauge steel top and 14-gauge steel bottom reinforced at load-bearing junctions and have a black wrinkle textured powder epoxy finish. The rack shall feature a solid steel rear door with key lock, two pairs of 11-gauge steel adjustable rails with mounting holes tapped 10-32 with rack unit increments printed on EIA spacing, rear frame with removable knockout panels, combination knockouts (1/2″, 3/4″, 1″, 1- 1/2″) for conduit wiring, BNC knockouts for UHF/VHF antenna, grounding stud, and integral top rails with mounting holes tapped 10-32. The rack shall include a bundle of accessories (not installed) as follows: solid front door, one pair side panels, 10″ turbo fan in a 7U rackmount panel, thermostat, 20A power strip with 24 outlets, six horizontal and one vertical cable managers, a bag of velcro cable wraps, four leg levelers and two extra bags of Pilot Point rack screws.