8 inch (100W) Coaxial Driver

Name: 8 inch (100W) Coaxial Driver
SKU: 8P100
Price: 315.34 USD
Availability: InStock

Includes driver

$315.34 MSRP

Model 8P100

This 8-inch 100W coaxial driver is engineered for high energy, high ceiling applications and is ideally suited to clubs, bars, hotel ballrooms, multi-purpose areas, convention and sporting facilities, transportation terminals, concourses and similar venues.

Add to Favorites

Compare

Description: Robust motor structure with 38 oz. magnet and 2 in. voice coil wound on a Kapton former. The high frequency compression driver is coaxially mounted behind the woofer and provides increased power handling with greater efficiency than a conventional dome tweeter. Built-in crossover network with second order high-pass and second order low pass filter accomplishes proper frequency division between the two drivers.
Frame: 18-gauge stamped steel with corrosion-resistant black electro-coat finish.
Power Rating: 100W RMS
Mounting Depth: 5.4 in.
Mounting Bolt Circle: 7.75 in.
Frequency Response: 45Hz–20kHz (±6dB)
Dispersion Angle: 105 degrees conical
Average Sensitivity: 92.6dB
Made in U.S.A. with global components
Meets or exceeds industry standards

Made in U.S.A. with global components
Meets or exceeds industry standards

The 8-inch 100W coaxial driver shall be Lowell Model 8P100 which shall be of the coaxial compression type having electrically independent high and low frequency transducers. The low frequency section shall have an 8 inch diameter cone and the high frequency section shall be a compression driver tweeter. A built-in electrical crossover network shall be employed to accomplish the proper frequency division between the two drivers. The crossover shall be at 2400Hz with a second order high-pass and a second order low-pass filter. The driver shall be capable of producing a uniform audible frequency response over the range of 45Hz–20kHz (±6dB), with a dispersion angle of 105 degrees @2kHz octave (-6dB). Average sensitivity shall measure 92.6dB (SPL at 1W/1M). Power rating shall be 100W RMS. The low frequency voice coil shall have a diameter of 2 inches and shall operate in a magnetic field derived from a strontium ferrite (ceramic) magnet having a nominal weight of 38 oz. The high frequency voice coil shall have a diameter of 1 inch and shall operate in a magnetic field derived from a ceramic magnet having a nominal weight of 7.7 oz. Voice coil impedance shall be 8ohms. The driver shall have a round, structurally reinforced stamped 18-gauge steel frame with 8 inch overall diameter and eight holes equally spaced at 45 degrees on a 7.75 inch diameter mounting bolt circle. Overall depth of the driver shall not exceed 5.4 inches. External metal woofer parts shall be black electrocoat to resist rust and corrosion.